Blog Image


RC Helicopter flying, RC Cars and RC boating

Made for other people and me to track what I am doing when with my remote controlled units. It started out with helicopters. Hence the name.

If only one of my units is of interest, this unit can be clicked on the right and only posts regarding that unit shows up.

This blog is open for comments so feel free to leave a comment.

UNIMOG door handles

Tamiya CR-01 UNIMOG Posted on Jan 09, 2018 21:10:03

Some time ago I did some 3D modeling in order to make some door handles for my UNIMOG as I think this is one of the shortcomings of this body.
I don’t have the skill to make the perfect 3D model so some post 3D printing work was needed on the handles themselves as have made them rectangular and they should be triangular. Search the net for pictures of UNIMOG door handles for reference. I can’t put them here because of copy rights.

receiving the 3D print I first had to cut the two handles apart so I
could work with them separately. Then I used a needle file to shape the
handles triangular instead of rectangular and to remove the remains of
the connecting block.

Then I painted the handles black using
Humbrol 33. When the black paint had set, I decided to test mount the
handles on my UNIMOG body. To do that I used a small (0,6mm) drill and a
pointed reamer. I started out drilling the rear hole. The handles are
marked on the UNIMOG body so positioning is quite easy. Then I used the
reamer to carefully expand the hole until the rear mounting pin would go
in. With the rear pin going into the mounting hole, I could pin point
the location of the front hole and repeated the process from the real
mounting hole.

With the handles test mounted I could see how much
of the handles should be green to match the body, so I used a small
brush to paint the green part of the handles. Later I removed the
handles and put on a second green coating (Humbrol 117).

Finally I put the handle back in place and secured them using Silicone.


Unfortunately I had mounted some wires for the lights exactly inside one of the door handle locations, so I had to cut the wires loose and now I have to repair the wires so I don’t get a short circut.
The 3D print I created can be bought from here:

Thanks for looking smiley

Putting strips on Jenny

Aero-naut Jenny Posted on Dec 26, 2017 15:19:00

As I am not really a fan of the stained hull Jenny has, I decided to put some strips on the sides of the hull. I found some 10×0,5mm mahogany strips. This was the widest strips I could find that were still very slim. If I had found some wider strips I would have picked those instead. Further mahogany seems to be the only kind of wood offered in this very thin format. Otherwise I might have picked another kind of wood.

The hull already had been given some layers of lacquer, so I also gave the strips a layer of lacquer on both sides. Then I sanded the strips and the hull very gently. The strips were easily cut to length using a scissor. Finally I glued the strips to the sides of the hull using CyanoAcrylate. Very easy to get them to stick. Much easier than what I experienced building the Phantom. If I was to build the Phantom again, I would definitely put some layers of lacquer on the hull and mahogany strips before gluing them to the hull.

Now I have some sanding to do and I still have some gaps to fill in the hull before I proceed. I should probably put some more lacquer on the mahogany before trying to fill in the gaps so the glue won’t mess with the mahogany. At some point I will make the mahogany bright and shiny as I did on the Phantom. Hopefully I know how to do it faster this time, but it will probably take at least 10 layers of lacquer before I am done.

Some pictures:

Thanks for looking smiley

More Jenny build pictures

Aero-naut Jenny Posted on Nov 21, 2017 20:54:24

After a little search the pictures I promised have been found. These pictures show how I used rubber bands to hold the sides in place while gluing them.

Here are the pictures:


Started building Jenny

Aero-naut Jenny Posted on Nov 19, 2017 20:03:19

Some time this summer I started building the Aero-naut Jenny. So far I have just been following the instructions. As I don’t have lot of time for my hobby, progress is slow and I have not been taking a lot of pictures.

Here are a few pictures of the hull the stern being glued on, using a lot of rubber bands:

I also have some pictures of the sides being glued on that I will soon post.

UNIMOG on trail drive

Tamiya CR-01 UNIMOG Posted on Oct 16, 2017 20:02:54

Yesterday I took the UNIMOG trailing with the local trail group. It was in one of the members garden and one of the guys made a nice video. Thanks:

The UNIMOG can be seen at 2.30. The UNIMOG performed flawlessly and was a pleasure to drive.


80ifying the Bruiser

Tamiya Bruiser Posted on Aug 02, 2017 20:59:37

Finally I have managed to get an after market decal set for the Tamiya Mountaineer with the purpose of 80ifying the bruiser. I always thought my Bruiser was a little dull looking and I thought the colours in the Mountaineer decals would match the off white body colour.

I only used a few of the decals as I am afraid it will be too much. I can always add more decals if I want to.

Here are some pictures:


Tightening the Bruiser slipper clutch

Tamiya Bruiser Posted on Jul 29, 2017 12:54:29

Last week I found the time to take the gearbox out of the Bruiser so the slipper clutch could be tightened. Not so much to taking the gearbox out. It seems to be designed for easy removal. I did have to cut some cable ties I had added so the cables wouldn’t be all over.

When doing this kind of thing it is always nice to have the manual at hand. This will show how things comes apart and goes back together. One frightening thing I found when I had taken the gearbox apart was that a shim and a bearing was missing.

Apparently I had assembled the gearbox wrong when I put the slipper clutch in. The Bruiser had been running fine even without the missing parts, but now i have put them in as I believe it is better to have the gearbox assembled correctly.

I haven’t tried the Bruiser out in terrain yet so I don’t know if I am content with this adjustment. The test run indoor does however show that there is much less slip in the slipper clutch now. So this operation was definitely an improvement.


Bruiser went trailing

Tamiya Bruiser Posted on Jul 20, 2017 18:55:39

A few weeks ago I went trailing with my Bruiser and a local trail group. Theis from the group shot some pictures. Here are the ones of my Bruiser:

There is a gallery at, where all the pictures can be seen:

This shoed what I already knew: I need to tighten the slipper clutch and I may need to lock one or more differentials.

I also brought the Bruiser along at work to show it off to some of the people who had helped me with the electronics. I think they were happy to see it.

Thanks for looking smiley

« PreviousNext »